Products

Double-wall Heat-shrinkable Tube Heating Machine

Double-wall Heat-shrinkable Tube Heating Machine

The double-wall heat-shrinkable tube heater is suitable for heating high-temperature heat-resistant heat-shrinkable tube, large diameter and long heat-shrinkable tube, double-wall heat-shrinkable tube, and heat-shrinkable tube with adhesive. The heating machine and the conveyer are used together to realize the precise heating of the heat shrinkable tube without damaging the wire. Suitable for mass production, 24 hours continuous operation, the distance between heating port and conveyor belt vertical and parallel direction can be adjusted, suitable for different sizes of heat shrinkable tube heating.

Model:	YH200B-2F-380L
Brand:	Yuanhan

Inquire

Share to:

Features

Specifications

One side or double side heating is optional

According to the heating requirements of the heat shrinkable tube, it is free to choose one side or two side heating.

The heating zone width, heating distance and left and right position can be adjusted.Accurate heating does not hurt the wire

The width of the heating zone and left and right position can be adjusted by the user according to the size of the heat shrinkable tube, save energy as much as possible and ensure the wire do not be hurt.

Heat insulation of heating machine

Double insulation, strong machine shell makes the machine safe and reliable, and can work in high temperature for a long time.

The temperature regulation of the heating machine (room temperature ~460℃) is precisely controlled by±1℃

The outlet is equipped with a temperature sensor, which can adjust the temperature according to the needs.The precision of temperature control is 1℃.

Term ordering detection function

This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.

Fan delay function

In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.

High heat exchange efficiency

Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the heater is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.

Air flow regulating valve

The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.

Security

It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment,do not produce exhaust gas, and meet the environmental protection,can keep operating 24 hours a day without stopping all year round.

Selection of assembly auxiliary conveyor

This machine is work in with auxiliary conveyors, and can be applied to heat shrinkable tubes with arbitrary specifications.

Model	YH200B-2F-380L
Size	Conveyor (L x W x H)	1250320360mm selective assembling
	Heating machine (L x W x H)	See picture
	Maximum wire harness diameter	20mm
	Maximum heating width	<90mm
	Heating area	400mm
	Cooling zone	200mm
	Maximum transmission width	250mm
	Maximum transmission height	<60mm
Conveyor belt	Texture of material	Stainless steel Teflon optional
	Speed	1~5m/min
	The power of the motor	25W (Stepless speed regulation)
Heating	Heating mode	Hot air
Heating	Heating pipe power	6000W,2 sets
Power supply	Power demand	380V three phases four wires 50HZ
Power supply	Power	12.3KW
Security	Safety grade	Ground wire