The micro-computer tensile strength tester machine is used for testing the mechanical properties of wires and cables, rubber, plastics, textiles, waterproof materials, non-woven fabrics and other non-metallic materials, as well as metal wire, metal foil, metal sheet and metal bar.
With special fixtures, various finished products can be tested by stretching, compressing, peeling, shearing, tearing, etc. to determine the quality of the product.
The machine can store the results of 10 test reference points, automatically calculate their average value, automatically obtain the maximum value and the force value at the time of fracture.
The machine includes a thermal printer that automatically outputs test results (optional).
Unit switching: Power: kN/N/kgf/gf/t/lbf, displacement: mm/cm/in
Automatic homing function and overload protection
Various test methods such as fixed load and positioning shift
The machine is simple in structure and easy to operate, which can be directly placed on the ground for testing, especially suitable for product quality control in production line.
|Capacity (optional)||10, 20, 50, 100, 200kg, 300kg, 500kg|
|Unit switch||Kg, lb, N|
|Data sampling frequency||200 times/sec|
|Test machine resolution||The maximum load is 1/±50000 yards, the internal and external are not divided, and the resolution is unchanged.|
|Load sensor||Basic configuration: pull and pressure sensor (maximum load)|
|Effective test width||150mm|
|Effective stretching space||800mm|
|Test speed range||50-500mm/min stepless speed regulation|
|Displacement measurement accuracy||±1％|
|Breakpoint ratio setting||0～99％, users can set the appropriate breakdown time according to different materials|
|Test bench safety device||up and down stroke limiting device|
|Overload protection||Over 10% of maximum load, automatic machine protection|
|Fixture configuration||One set of stretching fixture|