YH-450F-25 table type heat shrinkable tube heating machine is suitable for heat shrinkable tubes to be heated and contracted, and can be installed on the assembly line.The temperature can be adjusted according to the requirements of the production process, and the blowing time is short. It is suitable for any length of heat shrinkable tube. It can operate continuously for 24 hours and the power can be adjusted.
Connection and contraction of PE heat shrinkable tube, PVC heat shrinkable tube and double wall heat shrinkable tube with glue.
Heat shrinking of PVC pipe and rubber cap.
Heat shrinking of capacitors, batteries, terminal wires, heat shrinkable sleeves / membranes
The intelligent digital adjusts the temperature and adjusts the power.
Double insulation, strong machine shell makes the machine safe and reliable when used, and can work at high temperature for a long time.
Digital display temperature regulation
The outlet is equipped with a temperature sensor which can adjust the temperature according to requirements. The maximum use temperature is 395 degrees centigrade.
High heat exchange efficiency
Ingenious wind tunnel design, the air passes evenly through the spiral heating wire inside / outside, the heat exchange is nearly 100%, and the wind pressure loss is less.
Equipped with over heat overload protection and power off protection device, it fully ensures the safety of the equipment, does not produce exhaust gas, is environmentally friendly, and can operate continuously for 24 hours throughout the year.
|Size||Overall machine size||604*200*310MM|
|Air outlet||Diameter 50mm 25mm (optional)|
|Insulation layer||Texture of material||Double layer heat preservation|
|Heater||Name||Electric hot wire|
|Heater power||4.5KW (Power adjustable）|
|Power regulation||Adjust the voltage through a potentiometer|
|Heating wire life||100,000h|
|Maximum wind volume||450M3/H, the actual air volume is about 380M3/H|
|Air volume regulation||Manual wind valve|
|Temperature||Maximum use temperature||>380℃|